Concrete Contractors Hamilton lay driveways, patios, garage and shed floors, paths, commercial slabs and replacement concrete for Morrinsville property owners. Every pour is placed and finished by our own crew, with ready mix produced to NZS 3104 and finishes worked to NZS 3114. The jobs range from a single path to a commercial slab. Morrinsville is a town of owner-occupiers, with 75.5% of households owning their home or holding it in a family trust per the 2023 Census against 66% across New Zealand, and owners are the people who commission driveways, patios and shed floors.
Most of the work here happens on houses people already own, so it usually means working around an existing building, an existing driveway and a fence line, and the access down the side of the house decides the method more often than the size of the pour does. We measure and assess on site for free, then put a written quote in front of you.
4.8/5 Ratings
Hamilton
Projects Completed
Years in Business
Happy Clients
Concrete Services in Morrinsville
We pour driveways, patios, garage and shed floors, paths and commercial slabs for Morrinsville property owners.
Off-street parking is the usual reason people call us to pave an area, and Morrinsville households park more than most. The 2023 Census counted 40.3% of households here running two vehicles, 13.7% with three and another 7% with four or more.
Width and turning space matter more than length when that many vehicles share one entrance. A standard driveway is 100 mm at 20 MPa over compacted basecourse with 665 mesh, taking up to 2.5 tonnes.
Tell us how many vehicles live there. It changes the layout before it changes the price.
We pour foundations for new builds and for extensions onto the older houses Morrinsville is full of, and the second is the harder job.
An existing footing was built to the standard of its day, so a new slab gets tied into it rather than poured against it. We build to NZS 3604, with thickenings and reinforcement off the engineer plan. Where the existing footing cannot be reliably identified, that gets resolved on site before anything is priced.
Patios are the work we quote most often on established Morrinsville sections, and the constraint is nearly always getting material to the back of the house. There were 3,381 occupied dwellings in the town per the 2023 Census, most of them long finished.
We set falls away from the building and cut joints where the slab wants to move.
Load and use set how a shed floor gets poured, so tell us whether it is storage, a workshop or somewhere a vehicle sits. Point loads from a hoist or a rack change the steel.
We set a fall to the door so water leaves instead of sitting at the back wall, and power float where you want a surface that sweeps clean.
Access down the side of an existing garage is the thing to check first. That decides whether it is a barrow job or a pump job.
Paths are how we solve the muddy strip everyone on an older section has been walking on for years, and a narrow run uses as much site setup as a much bigger pour.
Falls take water off the path and away from the house. Steps get cast with the run so the nosings line through and nothing catches a toe.
Decorative finishes get chosen with us at the quote, because the finish sets the price band and the timeline. Exposed aggregate uses a surface retarder, a wash-off and a stone you pick.
Coloured concrete is either oxide batched through the mix or a hardener worked into the surface, and mixed-through colour will not flake back to grey. Finishes are worked to NZS 3114.
Sealing is recommended on exposed aggregate and we set the timing at handover.
Commercial slabs we scope on loading, subgrade, area, joint design and staging rather than on floor area alone. Manufacturing is Morrinsville largest employing industry at 19.7% of the working population, ahead of construction at 10.1%, so hardstand and floor work is a real part of what gets asked for here.
Commercial surface tolerance goes into the specification, and we go to 30 MPa where heavier vehicles run, 40 MPa where solid tyres do.
Where a slab is worth keeping we repair it instead of pushing a replacement, and most of what we see on established Morrinsville sections is worth keeping.
Stable cracks get cut, filled and sealed. Perished joint sealant gets raked out and replaced, which is what stops water tracking under the panel. Spalled edges get cut back to sound concrete. Movement is the one thing a repair cannot fix, so we check for it before quoting either way.
Breaking out old concrete is something we look at before committing, because thickness, reinforcement, machine access and tip arrangements all change the day and none of them is visible from the street. A reinforced 1970s driveway is a different day work from an unreinforced path.
We take the old surface out, re-prepare the base and pour fresh rather than laying new concrete over a failing slab.
Free on-site assessment
The assessment is free. We look at the ground, the falls and the drainage first, then put the quote in writing.
Morrinsville Concrete Pricing
Brackets, not quotes. The price for your job follows the free site assessment.
Driveways and flatwork, per m², roughly 30 m² and up
| Finish | Range per m² |
|---|---|
| Plain or broom finish | $100 to $150 |
| Coloured concrete | $120 to $170 |
| Exposed aggregate | $130 to $200+ |
| Stamped or patterned | $120 to $170 |
The $100 end assumes clear access and ground needing no extra work.
Patios, paths and smaller areas, per m²
| Item | Range per m² |
|---|---|
| Patio or courtyard, plain, roughly 15 to 30 m² | $100 to $150 |
| Paths, footpaths and narrow strips | $100 to $150 |
Each range covers subgrade preparation, excavation and cartage, compacted basecourse, reinforcement, the pour, the finish, joint cutting and clean-up. Plenty of published rates are supply and place only, with the excavation, base and drainage sitting outside the number, so ask what a quote actually includes before comparing two.
Quoted per job with no published figure: house slabs and foundations to NZS 3604, engineered slabs, commercial slabs and hardstand, breaking out existing concrete, and sealing.
Morrinsville Site Conditions
Morrinsville is a town of owner-occupiers, and that is the single most useful thing to know about concrete demand here. The 2023 Census put home ownership here at 75.5% of households, counting family trusts, against 66% across New Zealand. Owners commission driveways, patios and shed floors.
The town holds a reasonable amount of larger housing: 27.9% of private dwellings have four bedrooms and a further 4.4% have five or more. Bigger houses come with bigger areas of hard surface, wider entrances and more turning space, and that is where the square metre count on a quote comes from.
The town has grown steadily, not sharply. The census usually resident population count moved from 7,893 in 2018 to 9,003 in 2023, and the estimated resident population was 9,770 at 30 June 2025. Private dwellings went from 3,156 to 3,642 over the same census pair, and 72 dwellings were recorded under construction on census night 2023. The wider Matamata-Piako District held 39,200 people at 30 June 2025.
New builds are only part of the picture. Most of what gets poured in a town of that shape is on sections that already have a house on them: a driveway that has cracked past repair, a patio that never got built, a shed that has been sitting on gravel. Those jobs are decided by access and by what comes out before anything goes in.
Working around an existing Morrinsville house means the access is assessed before the price, which is the same way the concreters in Hamilton doing our city work approach a tight side entry.
Free on-site assessment
The assessment is free. We look at the ground, the falls and the drainage first, then put the quote in writing.
Morrinsville Concrete Questions
Plain or broom finish runs $100 to $150 per m². For coloured expect $120 to $170, for exposed aggregate $130 to $200+ and for stamped $120 to $170. These are indicative and not a quote. On a Morrinsville section with a house already on it, the two things that move the figure most are whether the old surface has to come out and how easily a truck can reach the pour.
We measure, check what is already down and look at how machinery gets around the existing house. On an older Morrinsville section the access down the side is usually what decides the method, so we settle that first. Anything that applies at your address is sorted before we price it, and the quote comes to you in writing.
Usually, and it is the first thing we check at the assessment. Older sections often have a garage, a fence line or a hedge narrowing the only route to the back. Where a truck cannot discharge directly we pump or barrow, and we price that honestly rather than discovering it on pour day. If a fence panel needs to come out for a morning, we will say so at the quote.
100 mm of 20 MPa concrete over compacted basecourse, with 665 mesh at 30 mm cover in the top third of the slab and joints saw-cut. That carries up to 2.5 tonnes, which covers cars, utes and vans. Where a heavier vehicle uses the driveway we go to 150 mm with heavier steel and 25 MPa above three tonnes gross. Ready mix is produced to NZS 3104.
Resurfacing is cheaper on the day and only worth doing when the slab underneath is sound. Where panels have lifted or settled, a resurface covers the symptom and the movement carries on underneath. We tell you which one you have at the free assessment, including when the honest answer is that the driveway has years left in it and only needs its cracks stitched and its joints resealed.
Yes, and they are quoted per job, not per square metre. Manufacturing is the largest employing industry in Morrinsville at 19.7% of the working population, so floors, hardstand and yard areas are regular work. Pricing follows the loading, the subgrade, the area, the joint design and whether the job has to be staged around an operating business. Surface tolerance is part of that scope.
Morrinsville, along with Hamilton City where most of our work is, and the wider Waikato including Tamahere, Matangi, Newstead, Horsham Downs, Horotiu, Ngāruawāhia, Te Kōwhai, Ōhaupō and Rukuhia.
